Design guide

Design your NFCKEY in your editor

Design it your way. Grab our template, open it in Figma®, Adobe Illustrator®, or Adobe Photoshop®, the tool you already know, drop in your artwork, then upload it straight to our editor.

Figma.fig
Adobe Illustrator.ai
Adobe Photoshop.psd
Check what your finished file should look like before you export →

Figma is a trademark of Figma, Inc. Adobe, Illustrator, and Photoshop are trademarks of Adobe Inc.

Your design here
51 mm
24.66 mm
01

What’s in the pack

The ZIP contains one file per editor. Use the one for the tool you actually work in — you do not convert between formats.

keyfob-template.fig
Figma — front and back in one file
keyfob-template-front.psd / keyfob-template-back.psd
Photoshop — one file per side
keyfob-template-front.ai / keyfob-template-back.ai
Illustrator — one file per side

Front and back are not interchangeable. The punch hole is top-right on the front and top-left on the back.

02

Artboard & dimensions

The file is slightly larger than the finished keyfob so colour can run off the cut. That extra strip is trimmed in production.

Finished size (after cut)
51 × 24.66 mm
Artboard (what you design on)
54 × 27.66 mm
Bleed
1.5 mm on every side
Safe area
3 mm inside the cut, and clear of the hole
Punch hole
diameter 4.5 mm
Hole, front
Top right
Hole, back
Top left
Scale
1:1 — do not resize the artboard
Resolution
300 ppi minimum (the Photoshop templates are 1270 ppi on purpose)

Put logos, text and barcodes inside the safe area. Backgrounds and full-bleed colour should reach the edge of the artboard, not stop at the cut. Anything on the hole will be punched out.

Do not change the artboard size, the hole, or the cut shape.

03

Layers — this is the contract

Every template has exactly two or three top-level layers — three on the back side. Names must stay exactly as they are (including the long dash in the guides and branding names).

YOUR DESIGN — unlocked. All of your artwork goes in here. Add groups, images, text, shapes — but only as children of this layer. On upload we keep this container and discard everything else.

  • Figma: this must stay a Frame with Clip content on, the same size as the page. Do not convert it to a Group. Do not turn clip off. Do not rename it.
  • Leave the white background rectangle in place if you want a white keyfob; recolour or cover it if you want a printed background.

GUIDES — DO NOT EDIT — locked, sitting above YOUR DESIGN as a sibling, never nested inside it. Do not unlock, move, recolour, rename or delete it. Do not draw artwork on this layer.

You do not need to hide the guides before export if you follow the per-editor steps. If you export the whole page from Figma, we try to strip the guide lines automatically; if they are merged into the same shape as your art, the upload is rejected.

SERVICE BRANDING — LOCKED — back side only, locked, non-printing, sitting alongside YOUR DESIGN as a sibling, never nested inside it. It shows the marks we add to every design made from this template — the NFC wave, the NFCKEY wordmark, and "by StoneDevices" — so you see them before you upload rather than after. You do not need to do anything with this layer: same treatment as the guides layer above — do not unlock, move, recolour, rename or delete it, and do not draw artwork on it. It is discarded on upload, exactly like the guides layer, and has no effect either way: the editor applies this template's real branding regardless of what your uploaded file contains.

You may

  • Hide layers inside YOUR DESIGN — hidden layers are not imported
  • Group related artwork inside the container
  • Use your own layer names inside it (Photoshop keeps those names; a flat PDF comes in as Layer 1, Layer 2, …)

Do not

  • Put artwork outside YOUR DESIGN
  • Create extra top-level layers (Illustrator: do not promote sublayers to the top)
  • Rename YOUR DESIGN — YOUR DESIGN logo is not the container, and that file will fail
  • Flatten the file to a PNG or JPG and upload that
  • Unlock, move, recolour, rename or delete SERVICE BRANDING — LOCKED on the back template — it is discarded on upload no matter what you do to it
04

What to upload

Upload one file per side. Front-only or back-only is fine. Maximum 25 MB per file. Images inside the file must be embedded (not linked) and at least 300 dpi at print size.

.pdf
Preferred from Figma. From Illustrator, PDF with Acrobat layers is also fine. Preferred
.ai
Modern Illustrator files that are PDF-compatible. If an old .ai is refused, Save As PDF and upload that. Accepted
.psd
Adobe Photoshop — keep real layer groups inside YOUR DESIGN. Do not flatten. Accepted
.fig
Edit in Figma, then export PDF from the YOUR DESIGN frame. Do not upload the .fig. Do not upload
.eps .png .jpg .svg
Embed images inside the PDF, AI or PSD instead. Standalone image files are not accepted. Not accepted
05

Export from Figma

  1. Open keyfob-template.fig.
  2. Work only inside the YOUR DESIGN frame on that side.
  3. Select the YOUR DESIGN frame (not the whole page).
  4. Export PDF, scale 1×. A 2× export is a 108 mm page and will be rejected.
  5. Repeat for the other side. You will have two PDFs.
  6. Upload those PDFs in Designer Studio.

Do not export the .fig itself. Do not use “Export full page”. Do not change the frame size — it must stay 153.07 × 78.41 px, which is 54 × 27.66 mm in Figma’s PDF export.

06

Export from Illustrator

  1. Open keyfob-template-front.ai or keyfob-template-back.ai.
  2. Keep every new object inside the YOUR DESIGN layer. Do not draw on GUIDES — DO NOT EDIT.
  3. In Layer Options for the guides layer, Print should stay unchecked.
  4. Upload the .ai directly, or File → Save As → Adobe PDF. If you save PDF, enable Create Acrobat Layers from Top-Level Layers.
  5. One artboard, one page. Use the other file for the other side.
  6. Outline fonts only if you do not need to edit that text later in Studio. Live text in a font we carry can stay editable; outlined text becomes artwork.

Do not promote nested layers to extra top-level layers. The only top-level artwork layer should remain YOUR DESIGN.

07

Export from Photoshop

  1. Open keyfob-template-front.psd or keyfob-template-back.psd.
  2. Put all artwork inside the YOUR DESIGN group. Groups inside it are fine — each top-level child of YOUR DESIGN becomes one object in Studio (a group stays one object, which preserves masks and effects).
  3. Do not flatten. File → Save (PSD).
  4. Do not change the document size or resolution.
  5. Blend modes other than Normal are flattened into the layer below on import. Prefer Normal.
08

Colour

We print CMYK on an HP Indigo press. Screens are RGB.

Design in CMYK when you can. An RGB file is accepted; we convert it, and saturated blues, neons and some reds can shift. Pantone / spot colours become the closest CMYK. For solid black text and fills use C0 M0 Y0 K100.

09

Type

You do not have to convert fonts to outlines for this upload.

  • Live text in a font Designer Studio provides can be retyped, moved and used for names, serials or UIDs after import.
  • Outlined text looks exactly as you drew it, but cannot be retyped.
  • If we do not have the font, that text is imported as artwork so we never silently substitute a different typeface.
  • Keep body text at least 6 pt. Finer type may be enlarged on import so it stays readable on a 51 mm keyfob.
  • Hairlines: at least 0.5 pt for dark strokes, 1 pt for light strokes.
10

After you upload

In Designer Studio choose Upload Print-Ready Artwork, drop the front and/or back file, and wait for the check.

If something is wrong, the message tells you what to fix (artboard size, empty YOUR DESIGN, artwork outside the container, guides still in a flat PDF, image below 300 dpi). Warnings — RGB, content near the cut or hole, background not quite to the edge — do not block the upload. They mean look at this before you approve the proof.

Accepted files come into the editor as ordinary layers you can select, move or hide. NFCKEY branding on the back stays; your file does not remove it. Add serial numbers, names or barcodes in Studio after import if you need variable data — that is not read from the uploaded file automatically.

Then continue as usual: preview, proof, approve.

11

What your finished file should look like

Your uploaded file should be clean artwork only. No technical marks, no guide lines baked in. Check these four things before you export.

Artwork

  • Design fills the entire artboard edge to edge — no white gaps at the boundary
  • No trim marks, registration marks, crop lines or colour bars
  • GUIDES layer stays in the working file (stripped on upload) but must not be flattened into the artwork

Fonts & strokes

  • Static text (headlines, logos) converted to outlines
  • Variable-data text (serials, names, UIDs) left live — supply the font file
  • Text you want editable in Studio can stay live if we carry the font
  • All stroked elements expanded to filled shapes

Images & colour

  • All placed images embedded, not linked
  • Minimum 300 dpi at print size
  • CMYK colour mode — RGB is accepted but saturated colours may shift
  • Pantone / spot colours converted to closest CMYK

Sizes & black

  • Black text and fills: C0 M0 Y0 K100 single-ink only
  • 100% Black text: 6 pt minimum. Colour text: 8 pt minimum
  • Dark strokes: 0.5 pt. Light strokes: 1 pt
  • Coloured text: no more than two process inks at small sizes

Ready for the next step?

Ready to upload?

Send us your finished file and we'll check it against the specs above before it goes to press.

Upload your design
Want to use the editor instead?

No design software? Build your NFCKEY right in our online editor, no files, no specs to worry about.

Build in the editor